Encore SATA2 RAID PCIE CARD VER. 2.00 Instrukcja Użytkownika Pobierz pdf (Strona 6)

Mar/07 MN

Auto configuration (recommended)

The default chunk size is 64k when selecting Auto configuration.

1. As the BIOS boots press Ctrl+S or F4 when prompted to enter

the RAID BIOS.

2. At the next screen select Create RAID Set, then press Enter.

3. Select RAID0, then press Enter.

4. Select Auto configuration, then press Enter.

5. Input the RAID size, press Enter.

6. When asked Are You Sure (Y/N)?, press Y to accept.

7. Press Ctrl+E to exit the BIOS.

8. When asked Are you sure to exit (Y/N)?, press Y to exit and

reboot.

9. Continue with FDISK and FORMAT steps as if you were

installing a conventional hard drive.

Manual configuration

1. As the BIOS boots press Ctrl+S or F4 when prompted to enter

the RAID BIOS.

2. At the next screen select Create RAID Set, then press Enter.

3. Select RAID0, then press Enter.

4. Select Manual configuration then press Enter.

1 2 3 4 5 6 7 8 9 10 11 ... 16 17

Brak uwag

Encore SATA2 RAID PCIE CARD VER. 2.00 Instrukcja Użytkownika Strona 6