Encore ENPSWI-2012 - QUICK V1.2 Dokumentacja Strona 1

TABLE OF CONTENTS COPYRIGHT...

3. Software Installation The PSAdmin is a proprietary Windows-based management program that can assist you in configuring and managing your print se

4. Click Next, the wizard will automatically discover the print server. 5. From the Select A Print Server screen, select the print server port th

Note: PARALLELRear PanelUSB1 USB2LAN PARALLEL is Port 1(PID1) USB1 is Port 2(PID2) USB2 is Port 3(PID3) 6. On the Change Settings screen, select

Click No if you want the print server to keep using the default IP address and keep the default Infrastructure settings: z Infrastructure mode z SS

z On the Wireless Security screen, enable or disable WEP/WPA encryption, configure according to your wireless network and click Next. z On the TCP/IP

9. Click Next and select Local Printer, make sure the Automatically detect and install my Plug and Play printer check box is NOT checked. Then clic

11. Select Manufacturer and Printer from the lists of printer’s driver. Then click Next. 12. If you already have the printer’s driver installed,

13. Then, choose whether you want to share the printer with other network users, print a test page (please select No.), etc. Select the appropriate

16. Right-click, select Properties -> Ports and verify that the print server’s port appears. 17. Go to General; click Print Test Page to verify

Note: If you wish to install more print servers, start setup wizard from your Windows Start menu: start -> All Programs -> Network Prin

UPGRADING THE PRINT SERVER FROM PSADMIN...67 UPGRADING THE PRINT SERVER FROM W

MAC Address: The Ethernet address of the print server. Print server Name: The print server to which the device is attached. Version: The firmware v

4 (Optional) In the Subnet Mask option, type the Subnet Mask your LAN or network segment is currently configured to use. 5 (Optional) In the Gate

5. Type in a Print Queue Names. Note: Each print queue corresponds to each print port of the print server. 6. Click OK. 7. Done. 8. From your Ne

Wireless: User can change the print server’s wireless settings and security to match his current wireless network. TCP/IP: User can change the pri

Netware: User can change the print server’s Netware settings to match his current Netware network. Apple Talk: User can change the print server’s

User can change the print server’s SNMP settings. Advanced: User can enable the print server’s Netware Bindery/NDS printing support.

Upgrade Upgrade allows the user to upgrade the print server device. In order to upgrade the unit please perform the steps as follows: 1. Click Upgrad

4.Internet Printer Connection and HP Web JetAdmin IPP Overview Print server(s) support the Internet Printing Protocol (IPP). Using the appropriate s

6. In URL’s box, input print server’s IP address, for example, http://192.168.10.182/lp1. Then Click Next. ** lp1 is the queue name for print port-1

9.If you want your Windows-based programs to use this printer as the default printer, please select “Yes”, and Click Next. It will appear as follow p

Trademarks NetWare is a registered trademark of Novell Inc and Windows 95/98/Me and Windows NT/2000/XP/2003/Vista are registered trademarks of Micros

Installing HP Web JetAdmin Before installing the HP Web JetAdmin software, you must have domain administrator or root privileges: Download the insta

5. Configuration from Embedded Web Server Overview The Print Server contains an embedded web server that can be accessed through a supported web b

Print Server Name: This option allows you to view device name of the print server. To correct the print server’s device name. System Contact: This o

Printer Status 1.Click Status, it then appears the sub-menu. 2.Click Printer, it then as shown in the following picture. Manufacturer: This opti

TCP/IP Status 1.Click Status, it then appears the sub-menu. 2.Click TCPIP, it then as shown in the following picture. Use DHCP/BOOTP: This opti

Netware Status: 1. Click Status, it then appears the sub-menu. 2. Click Netware it then as shown in the following picture. General Settings: Pri

NetWare Bindery Setting: Use Bindery Mode: Enable or Disable. Name of the File Server: Current Status: Connect or Disconnect. AppleTalk Status 1.Cl

2.Click SNMP, it then as shown in the following picture. SNMP Communities: This option allows you to view SNMP communities from the print server.

Workgroup Name: This option allows you to view the SMB Workgroup Name from the print server. It must match the SMB workgroup name of your Windows-base

Email Alert: This option allows you to Enable/Disable the Email Alert support. SMTP Server IP Address: This option allows you to input the IP addr

1. Introduction Product Overview The external print servers enhance capability by letting you place your printers at convenient locations directly on

˙User Name: You must be input the default administration user name, admin as login user name. ˙Password: The default password is empty. After setup

Basic Settings: Mode: Infrastructure or Ad-Hoc mode. Select SSID or Manually Enter SSID Below: You can use Site Survey to help you assign a SSID

TCP/IP Setup: 2. Click Setup, it then appears the sub-menu. 3. Click TCP/IP, it then as shown in the following picture. DHCP/BOOTP: This option

2.Select NetWare and type in the Print server that created during PCONSOLE Select the NetWare File Server to which the print server device will be at

Bindery Mode: To Enable Bindery Mode, if you want to setup Bindery environment. To select File Server Name of NetWare. Installing Print Server

7. Log into your NetWare file server as a Supervisor (Admin.) or equivalent via a Bindery connection. 8. Run NetWare’s PCONSOLE and add users to th

itself displays the zone name as an asterisk (*) in the current AppleTalk Status of the print server in the web browser. 4.Port Name: In this option,

For LPD printing application in Mac OS X 10.4.x 1. From the Printer Setup Utility, click Add. 2. Click IP Printer and select Line Printer Daemon – L

The Network Management Systems are available from many third-party vendors, such as Hewlett-Packard's OpenView. When accessing (traversing) MIB

SNMP Community: The print server supports up to two community names. The default community name is public (case-sensitive), with Read Only access r

LED Indicators LED State Indication On (Green) The Print Server’s power is on. Power Off The Print Server’s power is off. Status Blinking for POST

3. Workgroup Name: This option allows you to assign a workgroup name to print server on the Network Neighborhood. Windows uses it to identify the p

Select A Desired Protocol TCP/IP  The TCP/IP Protocol must be installed. For further information, please read “TCP/IP Protocol Installation” secti

6. Select TCP/IP Protocol from the Network Protocols list. 7. Specify an IP address, Subnet Mask, and Gateway address or specific “Obtain IP address

6. Select NetBEUI from the Network Protocols box and follow the instructions on the screen. 7. Restart your computer for new settings to take effec

15. Select the Network Print Port and click OK. 16. The Add Port box will then appear, along with the print server’s Node ID (The last 6 digits of

 It starts again to search for the print server on the network by using the protocol you specify in the step above. When finished, the print server

7. TCP/IP LPR Port Printing Installation Basic TCP/IP Installation Overview When installing your print server in a TCP/IP env

DHCP The print server supports DHCP feature, allowing the print server to obtain an IP address and related TCP/IP settings automatically from a DHC

8. In the Printer Ports box, select Close. 9. Click Next. 10. Select the appropriate printer manufacturer and printer type list and click Next. 1

6. In the Add Standard TCP/IP Printer Port Wizard box as shown in the following picture, Select Custom, Click Settings button, and click Next.

Note: The Status LED should be flash five times when POST. If not, please contact your local dealer for repair or replacement. PARALLELRear PanelUSB

Note: Please DO NOT type any other name than lp1, lp2 and lp3 in this step. 9. Click Finish. 10. Select the appropriate printer manufacturer and

61

UNIX Installation After the static IP address is assigned, the Print Server is ready to be configured. For some UNIX/Linux systems, we include the de

Redhat Linux 9 The Print Server can work under any Linux-based systems, including Slackware, RedHat, etc, without any problems. Basically, the Linu

7. Click Forward button. 8. In the Name field, type a user-defined name, click Forward. 64

9. In the Queue Type field, choose Networked UNIX. 10. In the Server field, type the IP address of print server 11. In the Queue field, type

15. Done. 66

8.Upgrading Print Server Overview Upgrading print server will allow you to upgrade its firmware inside the print server while the newer software ver

3. Wait for the transfer successful message. 4. Done. Upgrading the print server from UNIX (Through TCP/IP) 1. Log in as root 2. Ensure binary

4. Click Browse… and select the firmware file. 5. Click Upgrade. 6. Done.

Wireless Network with Print Server: Infrastructure (Access Point) Mode: PrinterPrint ServerComputer Computer ComputerHUBAccess PointLaptop Laptop

9. Troubleshooting General Troubleshooting Overview The most common problems, which cause the print server to perform improperly, are covered in this

Print Port Related Problems Printing data failure may be caused by a loose connection of the print server to the parallel or USB port of the printer.

11. Repeat the Steps 8-12 for the other Ethernet adapter. 12. Restart the computer. 13. Done. Moving the print server to A New Segment If the print

9. Done! Moving Your Computer to A New Segment If you are using the print server through the Network Print Port on your NT or Windows 95/98/Me co

B. The print server's IP address is duplicated or is as same as another computer's IP address on the network. If this

5. Type "edit config.txt" to modify this configuration file. 6. In your editor, modify "BoxIPAddress" field from "0.0.0.0&q

Appendix: SMB Printing with Windows XP system 1. Enable the SMB settings from the print server’s WEB configuration. Assume your computers use the “

3. Double click it again. 4. Now you have to install the printer’s driver.

5. Choose it from the “Add Printer Wizard”. 6. Install printer successfully. 78

7. Now, you can find your printer’s icon and you can use the SMB printing mode.

2. Print Server Installation Preparation To meet users’ network printing needs in today’s heterogeneous and multiple protocol networking environments

Reset Button Reboot the Print server: 1. Verify the power of print server is turned on. 2. Press the reset button once, and then release it. WARNIN

Frequently Asked Questions Question A Print jobs are sent to the print queue successfully, but fail to be sent to the printer. Possible explanati

Question D The Status LED light keeps blinking after POST. Possible explanation and solution The last upgrade process was not completed. The print

Additional Installation Instructions Panasonic KX-P6100/6300/6500 If you are using a Panasonic KX-P6100/6300/6500 laser printer with the print ser

Protocol- enabled print server Comment Configuration solution Table has many installations way to setup Windows 95/98/Me, Windows NT/2000/XP/2003, N