Encore ENDSS-R4D8 Instrukcja Użytkownika

ENDSS-R4D8 Digital Surveillance in a Box 8-Channel Digital Video Recorder and 4 CCD Security Cameras with Night Vision User’s Manual

ENDSS-4C8 2 1.1 Front Panel Control ENDSS-R4D8 No Button / Name Function 1 USB Connects the USB 2.0 device (Support the pen drive and card reader)

ENDSS-4C8 92 Find out your DVR IP address Now we know the Router IP address is 192.168.11.1. Generally the usable IP Address is from 192.168.11.2~192.

ENDSS-R4D8 93 Setup DVR IP Address When you find a usable IP address, go back to DVR menu: “Network Setup” to enter IP address. IP ADDRESS: Enter th

ENDSS-4C8 94 7.2.2 Create DynDNS Account Click the Create Account, and then start to create your own DynDNS Account and fill out all the blanks for a

ENDSS-R4D8 95 After you click "Create Account", it shows the message for verifying the account. DynDNS will create a new account for you a

ENDSS-4C8 96 7.2.3 Login and Host Service Log-in by entering the Username and Password of your account. Then, go to “My Service” to get a host name

ENDSS-R4D8 97 Double click “Add New Hostname” as following: Specify the Hostname for DYNDNS IP which will be applied to the DVR‟s DYNDNS setting. We

ENDSS-4C8 98 Press “Activate Services” Now, the DYNDNS service is completed.

ENDSS-R4D8 99 Take note of the User name, Password and Hostname. 7.2.4 Setup Router Most of the settings for the router are identical, here is the su

100 Chapter 8 8 PC Viewer & Web Browser Viewer

ENDSS-R4D8 101 8.1 PCViewer Installation PC Viewer will help you to play the video data on the Windows platform computer, Install the PCViewer utility

ENDSS-R4D8 3 1.2 Rear Panel Connector The rear panel of the DVR contains all of the connectors you will be using. No Name / Label Function 1 VID

ENDSS-4C8 102 8.1.1 Overview Click on the PC desktop icon “ PC Viewer” to execute the PC Viewer at the Windows platform computer. The PC Viewer suppo

ENDSS-R4D8 103 Step 3 Add a new DVR connection: Press the “Add' button to create a DVR connection. Step 4 Input or modify the DVR name, DVR

ENDSS-4C8 104 Step 6 Select the DVRs you would like to connect, viewing and control from the list of available DVRs. A check mark will indicate your

ENDSS-R4D8 105 Display 4 and 8channels viewing on one quadrant Double click the single channel viewing to switch the display. The screen will appear a

ENDSS-4C8 106 Display single channel in full view: Double click the specific channel you would like to display in full view, or click the “ ” icon to

ENDSS-R4D8 107 8.1.5 Capture Still Image Click on the icon to capture still image of the view that is currently displayed on the screen. Save the BM

ENDSS-4C8 108 Icon Name Function Left Limit Set the left limit of auto pan Right Limit Set the right limit of auto pan Patrol Start / Stop the auto

ENDSS-R4D8 109 8.1.7 Remote Playback Click on the icon to display the remote playback interface on your PC Viewer. 8.1.7.1 Preview of the Control B

ENDSS-4C8 110 8.1.7.2 Playback by Time Search “Time Search” playback mode supports playback by the specific time. Select the “Begin Date” and “Begin

ENDSS-R4D8 111 Press the button “Backup” start to backup the video data. Select the start date and time and end of date and time, the file size will

ENDSS-4C8 4 1.3 Remote Control No Button / Name Function in DVR Mode 1 REC Start or stop recording / backup. 2  DVR Switch to DVR mode 3  PTZ Switc

ENDSS-4C8 112 8.1.7.3 Playback by Event Search “Event Search” playback mode supports playback by the specific event. Select the “Event Begin Date”, “

ENDSS-R4D8 113 Click on the icon back to “Event Search” control window. Select the start date and time and end of date and time, the file size wil

ENDSS-4C8 114 8.1.8 Remote DVR Configuration Click the icon to display the remote configuration interface on your PC Viewer. Login the Remote Confi

ENDSS-R4D8 115 8.2 Web Browser Viewer This section introduces the remote viewing and control through Web Browser Viewer. This function is supported

ENDSS-4C8 116 Step 6 Select “Security” → “Trusted Sites” → “Sites” Step 7 Enter the DVR address into the blanks shown in picture, and click “add.”

ENDSS-R4D8 117 The newly added website will appear at the trusted web sites list. Press Close to leave the menu. Step 8 Go back to the internet brow

ENDSS-4C8 118 8.2.1 Switching the Channel Displays Display single channel in full view: Double click the channel to display single channel in full vie

119 Chapter 9 9 SecuViewer 10 For iPhones, iPad and iPod Touch

ENDSS-R4D8 120 10.1 Install SecuViewer for iPhones, iPad and iPod touch SecuViewer is the free software applications for iPhone, iPad and iPod touch u

ENDSS-R4D8 121 You can see the SecuViewer icon on the iPhone main screen. 10.2 SecuViewer Interface Overview Connect to the DVR Stop the DVR conne

ENDSS-R4D8 5 Chapter 2 2 Installation

ENDSS-R4D8 122 Display channel nine Display channel ten Display channel eleven Display channel twelve Display channel thirteen Display channel

ENDSS-R4D8 123 Select the “Setup” icon to setup the DVR connection. Please setup all information to connect to the DVR: » Network IP Address: Enter

ENDSS-R4D8 124 Tap on the “Play” icon to connect to the DVR. SecuViewer can display only one channel on the iPhone screen at a time. The default view

ENDSS-4C8 6 WARNING Make sure there is no power connection before starting installation! 2.1 Hard Disk Installation The type of DVR contains one inte

ENDSS-R4D8 7 Step 3 Remove 3 screws to take out the hard drive bracket. Step 4 Install the hard drive to the bracket. Four screw holes on both side

ENDSS-4C8 8 Step 5 Attach the hard drive‟s SATA data cable from hard drive to the main board‟s J16 or J17 jumper connector. Step 6 Screw the brac

ENDSS-R4D8 9 Step 7 Slide top cover back into place. Secure with four screws on the both sides. 2.2 Sensor and RS485 Connector Installation Th

ENDSS-4C8 10 2.3 TV System PAL/NTSC Video Format Detection The DVR can automatically detect the TV system video format either NTSC or PAL after t

ENDSS-R4D8 11 2.4.1 Brief Description for Connecting Devices Connecting the Security Cameras Connect each security cameras to the DVR video inputs RJ-

ii Warnings and Safety Precautions FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, purs

ENDSS-4C8 12 Connect audio peripherals to the ports labeled as “AUDIO-IN” and “AUDIO-OUT” on the DVR. These support devices for capturing or broadcast

13 Chapter 3 3 Getting Started

ENDSS-4C8 14 3.1 Turning on the DVR Box The DVR is ready for operations after all peripherals such as cameras, mouse, etc have been properly connected

ENDSS-R4D8 15 3.2 Home Screen The Home Screen is the starting point for many functions and applications. It allows you to setup, access, and control t

ENDSS-4C8 16 3.2.2 Control Bar Information The Control Bar may be used to switch displays, open and setup channels and their related applications.

ENDSS-R4D8 17 3.2.3 Drag and Drop Channel Swap The Drag and Drop Channel Swap enables swap the channel displays using your mouse. No need to interchan

ENDSS-4C8 18 3.3 Main Menu Logging In for the First Time Press  or the icon and enter the password to get into the Main Menu. Default password is “

ENDSS-R4D8 19 Icon Name Function Hardware Setup Configures error message checks, hard drive information, overwrite settings, network settings, PTZ/Ke

ENDSS-4C8 20 3.4.2 Basic Settings 3.4.2.1 Active Channel To set each channel or all channels are to record and to be displayed on the screen. “ON” – E

ENDSS-R4D8 21 Press the icon “ ” to enter the channel name. The channel name will appear on the channel square. Or you can define the name by using bu

iii IMPORTANT GUIDELINES User Manual – After unpacking this product, read the owner‟s manual carefully, and follow all the operating procedures and

ENDSS-4C8 22 Adjust the image position by mouse left-click follow the direction change of cursor icon up/ down/ right/ left. Press [ Default]

ENDSS-R4D8 23 3.4.3 Standard Color Adjustment Adjusts the video color parameters for each channel or simultaneously for all channels. CHANNEL SETUP

ENDSS-4C8 24 3.4.4 Special Color Adjustment Special Color Adjustment applies to video color parameters and designates the setting for a specified peri

ENDSS-R4D8 25 3.5 Record Setup Click “Record Setup” on the Main Menu. 3.5.1 Auto Record Auto Record is utilized to set the period (OFF, 10Sec, 20Sec,

ENDSS-4C8 26 RECORD SCHEDULE Channel Number None Time Motion Sensor Motion+Sensor Day\Hour

ENDSS-R4D8 27 NOTE When “Sensor Mode” is set for the recording schedule. Remember to complete the “Sensor Setup” at the main menu of “Detector Setup”

ENDSS-4C8 28 Press the icon “ ” to set the same mode for a specified time every day. The following example shows that from 23:00 to 24:00 (11:00pm to

ENDSS-R4D8 29 3.5.4 Total Power Total Power: 240/240 (Power / Sec) It shows the number of recording power that has been allocated and the total numbe

ENDSS-4C8 30 Video Resolution, Quality and Frame Rate Setting for each Channel Resolution: Press the button “◄ / ►” to adjust the resolution from CIF

ENDSS-R4D8 31 3.5.6.1 Channel Number Select the icon “ ” (for 4Ch), “ ” (for 8Ch) to setup for all channels at one time. Select the icons “ ”, “ ”, “

iv Damage Requiring Service – Unplug the unit from the outlet and refer servicing to qualified service personnel under the following conditions: »

ENDSS-4C8 32 3.6 Detector Setup Click “Detector Setup” on the Main Menu. 3.6.1 Channel Number Select the icon “ ” (for 4Ch), “ ” (for 8Ch) or “ ” (for

ENDSS-R4D8 33 3.6.2.1 Light Detect Mode This mode will be triggered when the video input and when the environment light becomes dark unexpectedly (clo

ENDSS-4C8 34 3.6.2.5 Video Loss Mode The Video Loss Mode is for detecting the loss of the camera video input. Enable: Activates video loss detection D

ENDSS-R4D8 35 3.6.3.1 Record Detection Activate This feature makes the whole setting of motion setup is efficacious and system will log the motion tri

ENDSS-4C8 36 3.6.3.6 Trigger Full Screen Trigger Full Screen is the duration of the of full-screen display when a channel is triggered. This may be se

ENDSS-R4D8 37 3.6.4 Sensor Setup Sensor Setup is accessed to configure the sensor mode for each channel or all channels. NOTE Remember to set up the

ENDSS-4C8 38 The default display when all channels are selected is: . (Note: There are more sensors for the 16Ch DVRs but the operating princip

ENDSS-R4D8 39 3.6.4.7 Trigger Full Screen Trigger Full Screen is the duration of the of full-screen display when a channel is triggered. This may be s

ENDSS-4C8 40 : Creates a new account : Deletes an account Account ID: Enter characters as the account ID Passd (Password): By entering six charac

ENDSS-R4D8 41 Click “[ Option]” for audio monitoring setup Click the icons for setting: : Allows the user to monitor audio recording from the channel

v CAUTION Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the

ENDSS-4C8 42 3.8.1 Language Selection Language Selection is used to select the language for the on-screen display (OSD) Menu. 3.8.2 View Setup View Se

ENDSS-R4D8 43 3.8.2.1 Main Menu Graphics Mode Sets the main menu displayed by graphic icons or text mode. Graphics Mode MAIN MENU

ENDSS-4C8 44 3.8.2.5 State Bar Information Determines how system status information is set and shown. VIEW SETUP System Di

ENDSS-R4D8 45 3.8.2.6 Channel Information Enable or disable the channel information icons is set and shown on the home screen. (4Ch)

ENDSS-4C8 46 3.8.3 Date/Time Setup Date/Time Setup Menu sets relevant information on date and time. 3.8.3.1 Date Display Mode Date Display Mode is use

ENDSS-R4D8 47 3.8.3.4 Daylight Saving Time “Daylight Saving Time” is for adjusting the DST settings (for countries where it is applicable). 3.8.3.4.1

ENDSS-4C8 48 3.8.3.5 NTP Server NTP Server allows for the synchronization of the day/ time settings with the NTP server through internet.  Activate

ENDSS-R4D8 49 3.8.4 Sequence Setup The Sequence Setup Menu is for setting the channel rotation sequence period. Full Screen Sequence Enables or disab

ENDSS-4C8 50 3.8.5 Button Beep Setup The Button Beep Setup configures the type of beeping sound for the mouse, keypad, and IR remote operations. The s

ENDSS-R4D8 51  IR Repeat Speed: OFF, Slow, Normal, Fast NOTE Keypad repeat speed is available for models equipped with keypad. 3.8.7 Auto Exit Me

vi Table of Contents Warnings and Safety Precautions ...ii Table of Contents ...

ENDSS-4C8 52 3.9.1 Query Error Message The Query Error Message window shows the all error messages. [ View Time]: Sort error messages by time of occ

ENDSS-R4D8 53 3.9.2.2 Max. Recording Days This function enables to specify the days of recording data which is retained in the hard drive. It will be

ENDSS-4C8 54 3.9.3 Network Setup Network Setup is for adjusting network configurations. 3.9.3.1 Network Enable [ Enable]: Network may be used [ Dis

ENDSS-R4D8 55 IP Type There are two options for IP type: Static IP address and Dynamic IP address (DHCP and PPPoE). Static IP Address: User must man

ENDSS-4C8 56 Management Service Activate Service: Enables or disables the management service for allowing remote control from IE or PC Viewer. Monit

ENDSS-R4D8 57 Dynamic DNS Dynamic DNS is a system that allows the domain name data held in a name server to be updated in real time. Please refer to t

ENDSS-4C8 58 3.9.4.1 Pan/Tilt/Zoom Setup The Pan/Tilt/Zoom Setup allows you to modify the PTZ settings for each channel of the DVR. These settings nee

ENDSS-R4D8 59 PAN/TILT/ZOOM SETUP Channel Number PTZ Protocol

ENDSS-4C8 60 3.9.4.2 RS-485 The DVR uses the RS-485 standard for PTZ communication. The following settings must be configured in parallel wit

ENDSS-R4D8 61 3.9.5 Screen Setup Adjusts the video format and resolution of the display device. HARDWARE SETUP Query Error Mess

vii 3.7 Authentication Setup ... 39 3.8 System Setup ...

ENDSS-4C8 62 Main Display Screen Provides options to connect the main display screen to either a BNC or VGA port (Labeled as “VIDEO-OUT”). VGA Resolut

ENDSS-R4D8 63 3.9.6 Audio Setup Audio Setup relates to the settings for the audio device that may be connected to your DVR. HARDWARE SETUP

ENDSS-4C8 64 3.10 Utility/Tools These tools help you to format the USB dongle, to update firmware, to export event logs and to load or restore the env

ENDSS-R4D8 65 3.10.2 Firmware Update The firmware is updated by using a USB pen drive that contains the latest firmware file. Attach the external USB

ENDSS-4C8 66 If there is a mistake or missing file on the pen drive, it will show: File not found or Disk Error on the bottom line. Please check US

ENDSS-R4D8 67 After firmware update is completed, Firmware update is success, System will restart ----“ is displayed, and then the system restarts. F

ENDSS-4C8 68 Load Settings from USB LOAD SETTINGS FROM USB USB Disk [General Flash Disk] File System

ENDSS-R4D8 69 Restore Default Setting This command resets the system to its default settings. Load default setting Restore default setti

ENDSS-4C8 70 Click on the icon if you access this from the Main Menu in Graphics Mode. If you have made changes, you will be asked whether or not yo

71 Chapter 4 4 Playback and Data Backup

viii 7.2.3 Login and Host Service ... 96 7.2.4 Setup Router ...

ENDSS-4C8 72 4.1 Calendar Menu The Calendar Menu is a play back feature that allows you to access recorded videos by selecting the date and time when

ENDSS-R4D8 73 Choosing the time of the video to play back Once you‟ve chosen the date, the hours with recorded videos will be in a vivid green color

ENDSS-4C8 74 4.2 Play Menu Press “” (or “II”) button or icon to enter Play Menu in the live view window. PLAY MENU

ENDSS-R4D8 75 Commands and Recorded Data status: PLAY MENU Channel Number Play Begin Time

ENDSS-4C8 76 Video Playback Control Bar You will see the control bar during video playback. PIP View Displays real-time video and playback video s

ENDSS-R4D8 77 4.3 Event Search Press “” (or “”) button or icon to enter Event Search Menu. Channel Number: Specifies the channels to search

ENDSS-4C8 78 SEARCH MENU Channel Number Filter Type

ENDSS-R4D8 79 4.4 Data Backup The DVR supports data backup by USB 2.0 device (Support the pen drive and card reader) on the front panel. Press the “

ENDSS-4C8 80 Backup Device: shows the backup device where data will be stored for backup. Free Capacity: shows the amount of free space on the bac

ENDSS-R4D8 81 Chapter 5 5 PTZ Control

ENDSS-R4D8 1 Chapter 1 1 Overview

ENDSS-4C8 82 5.1 Pan/Tilt/Zoom Control Pan/Tilt Zoom Control screen is for easy operation of your PTZ-capable camera. Click on the PTZ Control icon on

ENDSS-R4D8 83 NOTE Make sure to properly configure the Pan/Tilt/Zoom Setup. You can access this menu by going to the Main Menu then Hardware

ENDSS-4C8 84 Icon Name Operation Iris Open Left-click on this icon to allow more light to enter the lens Iris Close Left-click on this icon to allow

ENDSS-R4D8 85 1% 2010/06/06 15:37:47

ENDSS-4C8 86 Chapter 6 6 System Information

ENDSS-R4D8 87 6.1 Record Information The “Record Information” menu displays the current states of the DVR system. On your Control Bar, locate and clic

ENDSS-4C8 88 6.2 Hard Drive Information The Hard Drive Setup menu displays the hard drive status. On your Control Bar, locate and click on the icon.

ENDSS-R4D8 89 6.3 Network Information Network Information displays the current state of network connections. On your Control Bar, locate and click on

ENDSS-4C8 90 Chapter 7 7 LAN & Online Viewing Setup

ENDSS-R4D8 91 7.1 PC Connection through Local Area Network Here is an example that shows how to find the basic network information from the local area